Please wait..

Select Category:

2011 JAGUAR XK BASE COUPE 5.0L V8 - VEHICLES, EQUIPMENT, TOOLS, AND SUPPLIES - PAGE 16

Vehicle Dolly - GoJak G5211
$0.00
$296.80
Quantity:

Question?

Part Number: G5211
Notes: Provides a technician with a simple and efficient method of moving a disabled vehicle around a shop environment. Position a dolly at each wheel of a vehicle weighing up to 5,200 lbs. and use the foot pedal to engage the bi-directional ratchet. Mechanical leverage applied to the foot pedal progressively squeezes the vehicle tire between the two rollers until the tire lifts off the ground.
Fits tires as wide as 11 inches and up to 34 inches tall. The four heavy-duty, double-ball 3-inch casters can support up to 1,300 lbs. per unit, while at the same time, protecting the shop floor from damage.
Sold individually.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: GOJAK Available to ship: 10+ Inventory Locations Ships tomorrow
Vehicle Dolly - GoJak G6313
$0.00
$313.53
Quantity:

Question?

Part Number: G6313
Notes: Provides a technician with a simple and efficient method of moving a disabled vehicle around a shop environment. Position a dolly at each wheel of a vehicle weighing up to 6,300 lbs. and use the foot pedal to engage the bi-directional ratchet. Mechanical leverage applied to the foot pedal progressively squeezes the vehicle tire between the two rollers until the tire lifts off the ground.
Fits tires as wide as 13 inches and up to 36 inches tall. The four heavy-duty, double-ball casters can support up to 1,574 lbs. per unit, while at the same time, protecting the shop floor from damage.
Sold individually.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: GOJAK Available to ship: UNAVAILABLE Inventory Locations
Vehicle Dolly Storage Rack
$0.00
$117.98
Quantity:

Question?

Part Number: G567R
Notes: Rolling storage cart holds up to four GoJak vehicle dollies, fits all models.
Vehicle dollies not included.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: GOJAK Available to ship: UNAVAILABLE Inventory Locations
Wheel Hub Cleaning Pad Set - 3 Piece
$0.00
$112.41
Quantity:

Question?

Part Number: 4960R01603
Notes: Replacement 160 mm cleaning pads for Hazet# 4960R-160/4.
Contains: (Qty.) (3) 160 mm Cleaning Pads.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: HAZET Available to ship: 1 Inventory Locations Ships tomorrow
Wheel Hub Cleaning Pad Set - 5 Piece
$0.00
$81.28
Quantity:

Question?

Part Number: 4960N405
Notes: Replacement 40 mm cleaning pads for Hazet # 4960N-45/12.
Contains: (Qty.) (5) 40 mm Cleaning Pads.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: HAZET Available to ship: 4 Inventory Locations Ships tomorrow
$0.00
$91.73
Quantity:

Question?

Part Number: 4960N505
Notes: Replacement 50 mm cleaning pads for Hazet # 4960N-45/12.
Contains: (Qty.) (5) 50 mm Cleaning Pads.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: HAZET Available to ship: 3 Inventory Locations Ships tomorrow
Wheel Hub Cleaning Tool Kit - 4 pieces
$0.00
$202.14
Quantity:

Question?

Part Number: 4960R1604
Notes: Used to clean wheel and brake disc hubs. No spark, cup-shaped, open-pored abrasive material cleaning pads reduce dust formation. Hook and loop attachment of cleaning pads suitable for wheel hubs up to 160mm. Base component designed with 11 mm outside hexagon with 3 contact surfaces for use with power drill. Wear resistance: approximately 100 vehicles per pad.
Contains: (Qty.) (1) Base component, (3) 160 mm grinding wheels.
For replacement cleaning pads, see part# 4960R-0160/3.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: HAZET Available to ship: 1 Inventory Locations Ships tomorrow
Wheel Hub Flange Cleaning Pad Set
$0.00
$124.12
Quantity:

Question?

Part Number: 4960F01603
Notes: Replacement 160 mm cleaning pads for Hazet# 4960F-160/2.
Contains: (Qty.) (3) 160 mm Cleaning Pads.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: HAZET Available to ship: UNAVAILABLE Inventory Locations
Wheel Lock Removal Tool Kit - CTA Lugdriller
$0.00
$489.63
Quantity:

Question?

Part Number: 1775
Notes: Removes the most difficult locking lug bolts quickly, safely and without damage to wheel or rim, great for all vehicles with lost or damaged locking lug bolt keys.
Contains: (Qty.) (4) Nylon internal centering guides, (3) metal external centering guides, (1) metal centering guide for free turning lugs, (2) ultra hard drill bits with tungsten carbide tips, (4) extractors, (1) impact extractor holder, (1) impact extractor remover.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: CTA TOOLS Available to ship: 8 Inventory Locations Ships tomorrow
Wheel Weight Remover Set
$0.00
$35.58
Quantity:

Question?

Part Number: V2512
Notes: For disassembling adhesive weights on aluminum wheels, or removing labels, adhesive and nameplates. Solvent resistant plastic scrapers will not damagesurfaces.
Includes: (Qty.) (1) 19 mm weight remover, (1) 22 mm weight remover, (1) 25 mm weight remover, (1) 38 mm weight remover.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: VIGOR Available to ship: 2 Inventory Locations Ships tomorrow
Windshield Washer Nozzle Adjusting Tool
$0.00
$14.43
Quantity:

Question?

Part Number: 48501
Notes: For adjusting windshield washer nozzles. Coated, telescopic tool shows the water beam direction.
Includes adjusting needle and protective cap, magnetic head 6 mm in diameter, and pocket clip.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: HAZET Available to ship: 10+ Inventory Locations Ships tomorrow
Windshield Wiper Arm Tool
$0.00
$27.40
Quantity:

Question?

Part Number: 4676
Notes: Removes wiper arms on many foreign and domestic cars and light trucks. Will not damage wiper arm or hood cowling during removal. Simply place puller feet under wiper arm and tighten forcing screw against wiper shaft.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: OTC Available to ship: UNAVAILABLE Inventory Locations
Wire Holder Tool
$0.00
$59.48
Quantity:

Question?

Part Number: WSC15
Notes: Hold wires firmly in place during soldering. Spring loaded, articulating claws clamp onto wires firmly. Six inch flex cable arm for difficult to reach areas.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: ASSENMACHER TOOLS (AST) Available to ship: 6 Inventory Locations Ships tomorrow
Wire Stripper - Automatic Type
$0.00
$32.30
Quantity:

Question?

Part Number: 1862
Notes: For 0.5 mm to 4 mm solid and stranded wire. Automatic adjustment to the wire's cross section. Integrated side cutter. Plastic housing.
180 mm length.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: HAZET Available to ship: UNAVAILABLE Inventory Locations
Work Gloves - Mechanix Wear M-Pact (Black/Gray)
$0.00
$29.34
Quantity:

Question?

Part Number: MPT58
Notes: Full-coverage hand protection with a sonic welded Thermoplastic Rubber knuckle guard and dedicated finger guards that shield the top of your hand from unexpected impact and abrasion injuries. The dual-layer internal fingertip construction reinforces high wear areas of the thumb and index finger for improved abrasion resistance, while the embossed and textured fingertip pattern provides grip where you need it most. With high-impact XRD padding in the palm to reduce shock and vibration.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: MECHANIX WEAR SIZE XXL Available to ship: 10+ Inventory Locations Ships tomorrow
Work Gloves - Mechanix Wear The Original (Black)
$0.00
$21.60
Quantity:

Question?

Part Number: MG05
Notes: Tried, tested and proven for over 20 years, provides the perfect blend of flexibility and protection. Durable synthetic leather palm and breathable TrekDry back-of-hand combine to create the ultimate tool for hardworking hands. A new tapered Thermoplastic Rubber closure and increasingly stronger hook and loop provide a secure fit to the wrist.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: MECHANIX WEAR SIZE XXL Available to ship: 9 Inventory Locations Ships tomorrow
Work Light - Saf-T-Lite Stub-E LED Rechargeable Work Light
$0.00
$37.76
Quantity:

Question?

Part Number: 23040001
Notes: Compact and multi-functional rechargeable work light with neodymium magnet. Small size and strong magnet allows placement in tight spaces. 250 lumen wide angle work light. 70 Lumen work light option with up to 8 hour battery life. 390-400NM UV leak detection LED.
Includes: (Qty.) (1) Stub-E LED Work Light, (1) Work belt clip with integrated magnet, (1) USB mini cord, (1) 120V charger.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: SAF-T-LITE Available to ship: 10+ Inventory Locations Ships tomorrow
Wrench - Open Box-end Wrench - 36mm
$0.00
$138.77
Quantity:

Question?

Part Number: 848Z36
Notes: 22 point, 1/2 inch square drive wrench. For union nuts and tube connections.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: HAZET Available to ship: 4 Inventory Locations Ships tomorrow
Wrench Set - 8-Piece Brake Bleeder Wrench Set
$0.00
$149.20
Quantity:

Question?

Part Number: 1945
Notes: Brake bleeder wrench set includes 7 popular sized wrenches and a 4 feet hose to allow use on virtually any car, SUV, light truck, or motorcycle brake caliper or wheel cylinder. Completes a brake bleeding service without removing the wheels or raising the vehicle.
Contains: (Qty.) (1) 3/8" 6-point hex wrench, (1) 7 mm 6-point hex wrench, (1) 8 mm 6-point hex wrench, (1) 9 mm 6-point hex wrench, (1) 10 mm 6-point hex wrench, (1) 11 mm 6-point hex wrench, (1) 12 mm 6-point hex wrench, (1) 4' Silicone hose.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: CTA TOOLS Available to ship: 7 Inventory Locations Ships tomorrow
XZN (Triple Square) Socket Set - 1/2" Drive
$0.00
$90.54
Quantity:

Question?

Part Number: V7018
Notes: Contains: (Qty.) (1) M5, (1) M6, (1) M8, (1) M10, (1) M12, (1) M14, (1) M16, (1) M18.
Part fits: 2011 Jaguar XK Base Coupe 5.0L V8 Quantity needed: 1 Manufacturer: VIGOR Available to ship: 6 Inventory Locations Ships tomorrow
Click on the image to close it Large Image
Please Wait... processing