1977 Mercedes-Benz 300D Base
Sedan
123.130
3.0L L5 — 617.912
Position: Front
Quantity needed: 2
Fitment note: Sway Bar Link Repair Kit (Repair Solution); The sway bar end links are not available from the vehicle manufacturer. This repair kit includes: new bushings, washers, bolt and special stainless steel repair piece.; Instructions as follows: (1) Loosen the upper control arm mount on sway bar. (2) Remove the bolt, washer and rubber mount from sway bar end. (3) Cut the sway bar end off to approximately 1/2" back from the thin section. (4) Clean end and weld the Sway Bar Saver in place. (5) Install upper control arm outer bushings and tighten.; Saves approximately 20 hours labor time versus replacing the entire sway bar.
1978 Mercedes-Benz 300D Base
Sedan
123.130
3.0L L5 — 617.912
Position: Front
Quantity needed: 2
Fitment note: Sway Bar Link Repair Kit (Repair Solution); The sway bar end links are not available from the vehicle manufacturer. This repair kit includes: new bushings, washers, bolt and special stainless steel repair piece.; Instructions as follows: (1) Loosen the upper control arm mount on sway bar. (2) Remove the bolt, washer and rubber mount from sway bar end. (3) Cut the sway bar end off to approximately 1/2" back from the thin section. (4) Clean end and weld the Sway Bar Saver in place. (5) Install upper control arm outer bushings and tighten.; Saves approximately 20 hours labor time versus replacing the entire sway bar.
1979 Mercedes-Benz 300D Base
Sedan
123.130
3.0L L5 — 617.912
Position: Front
Quantity needed: 2
Fitment note: Sway Bar Link Repair Kit (Repair Solution); The sway bar end links are not available from the vehicle manufacturer. This repair kit includes: new bushings, washers, bolt and special stainless steel repair piece.; Instructions as follows: (1) Loosen the upper control arm mount on sway bar. (2) Remove the bolt, washer and rubber mount from sway bar end. (3) Cut the sway bar end off to approximately 1/2" back from the thin section. (4) Clean end and weld the Sway Bar Saver in place. (5) Install upper control arm outer bushings and tighten.; Saves approximately 20 hours labor time versus replacing the entire sway bar.
1980 Mercedes-Benz 300D Base
Sedan
123.130
3.0L L5 — 617.912
Position: Front
Quantity needed: 2
Fitment note: Sway Bar Link Repair Kit (Repair Solution); The sway bar end links are not available from the vehicle manufacturer. This repair kit includes: new bushings, washers, bolt and special stainless steel repair piece.; Instructions as follows: (1) Loosen the upper control arm mount on sway bar. (2) Remove the bolt, washer and rubber mount from sway bar end. (3) Cut the sway bar end off to approximately 1/2" back from the thin section. (4) Clean end and weld the Sway Bar Saver in place. (5) Install upper control arm outer bushings and tighten.; Saves approximately 20 hours labor time versus replacing the entire sway bar.
1981 Mercedes-Benz 300D Base
Sedan
123.130
3.0L L5 — 617.912
Position: Front
Quantity needed: 2
Fitment note: Sway Bar Link Repair Kit (Repair Solution); The sway bar end links are not available from the vehicle manufacturer. This repair kit includes: new bushings, washers, bolt and special stainless steel repair piece.; Instructions as follows: (1) Loosen the upper control arm mount on sway bar. (2) Remove the bolt, washer and rubber mount from sway bar end. (3) Cut the sway bar end off to approximately 1/2" back from the thin section. (4) Clean end and weld the Sway Bar Saver in place. (5) Install upper control arm outer bushings and tighten.; Saves approximately 20 hours labor time versus replacing the entire sway bar.
1982 Mercedes-Benz 300D Base
Sedan
123.133
3.0L L5 — 617.952
Position: Front
Quantity needed: 2
Fitment note: Sway Bar Link Repair Kit (Repair Solution); The sway bar end links are not available from the vehicle manufacturer. This repair kit includes: new bushings, washers, bolt and special stainless steel repair piece.; Instructions as follows: (1) Loosen the upper control arm mount on sway bar. (2) Remove the bolt, washer and rubber mount from sway bar end. (3) Cut the sway bar end off to approximately 1/2" back from the thin section. (4) Clean end and weld the Sway Bar Saver in place. (5) Install upper control arm outer bushings and tighten.; Saves approximately 20 hours labor time versus replacing the entire sway bar.
1983 Mercedes-Benz 300D Base
Sedan
123.133
3.0L L5 — 617.952
Position: Front
Quantity needed: 2
Fitment note: Sway Bar Link Repair Kit (Repair Solution); The sway bar end links are not available from the vehicle manufacturer. This repair kit includes: new bushings, washers, bolt and special stainless steel repair piece.; Instructions as follows: (1) Loosen the upper control arm mount on sway bar. (2) Remove the bolt, washer and rubber mount from sway bar end. (3) Cut the sway bar end off to approximately 1/2" back from the thin section. (4) Clean end and weld the Sway Bar Saver in place. (5) Install upper control arm outer bushings and tighten.; Saves approximately 20 hours labor time versus replacing the entire sway bar.
1984 Mercedes-Benz 300D Base
Sedan
123.133
3.0L L5 — 617.952
Position: Front
Quantity needed: 2
Fitment note: Sway Bar Link Repair Kit (Repair Solution); The sway bar end links are not available from the vehicle manufacturer. This repair kit includes: new bushings, washers, bolt and special stainless steel repair piece.; Instructions as follows: (1) Loosen the upper control arm mount on sway bar. (2) Remove the bolt, washer and rubber mount from sway bar end. (3) Cut the sway bar end off to approximately 1/2" back from the thin section. (4) Clean end and weld the Sway Bar Saver in place. (5) Install upper control arm outer bushings and tighten.; Saves approximately 20 hours labor time versus replacing the entire sway bar.
1985 Mercedes-Benz 300D Base
Sedan
123.133
3.0L L5 — 617.952
Position: Front
Quantity needed: 2
Fitment note: Sway Bar Link Repair Kit (Repair Solution); The sway bar end links are not available from the vehicle manufacturer. This repair kit includes: new bushings, washers, bolt and special stainless steel repair piece.; Instructions as follows: (1) Loosen the upper control arm mount on sway bar. (2) Remove the bolt, washer and rubber mount from sway bar end. (3) Cut the sway bar end off to approximately 1/2" back from the thin section. (4) Clean end and weld the Sway Bar Saver in place. (5) Install upper control arm outer bushings and tighten.; Saves approximately 20 hours labor time versus replacing the entire sway bar.
