BMW Intake Hose Bapmic 13717604033

Good product. Fit well. Had to reuse the old sensor though. New one threw codes. Installation tip: there’s a small slide in mount that gets in the way of lining things up. Unbolt it, think it’s 12mm, get the bottom aligned and fixed, then the top, then reattach the hold

Good product. Fit well. Had to reuse the old sensor though. New one threw codes. Installation tip: there’s a small slide in mount that gets in the way of lining things up. Unbolt it, think it’s 12mm, get the bottom aligned and fixed, then the top, then reattach the hold

Replaced this part on my 2014 X3 Drive 35i. Took a gamble on this on since hit was 1/3 the price. I took a little effort to install it. A few issues during the install. First the Map sensor/ Charging pressure sensor hold was misaligned when assembled. The hold was about 1/8 of inch off and had some overlap plastic. I used a Dremel to grind out the overlap. Second issue was the clip that hold the pipe to the throttle housing was too think, So aligning and install took some time. I ended up reusing the OEM one and it installed fine. Third, most important was the map sensor/ charging pressure that came with it was bad, it kept throwing an engine check light. I cleared it serval time and it came back. Ended up swapping with the original used one, cleared the code and so far it working.